展品范圍：(注：所有展品類別以英文為準)
1. Hydraulic engineering and well construction
水利工程和井建設
□ 1.1 Protection, development and maintenance of water bodies
水體保護、開發與維護
□ 1.2 Flood and coastal protection 防洪與海岸防護
□ 1.3 Irrigation and drainage technology 灌溉和排水技術
□ 1.4 Construction and rehabilitation of wells 井建設與修復
2. Construction of water and wastewater treatment
plants 水和污水處理設備建設
□ 2.1 Mechanical-physical processes 機械物理處理工藝
□ 2.2 Chemical-physical processes 化學物理處理工藝
□ 2.3 Biochemical processes 生化處理工藝
□ 2.4 Membrane processes 膜處理法
□ 2.5 Treatment of sludge and residues 污泥和殘渣的處理
□ 2.6 Usage of sludge and residues 污泥及殘渣的利用
□ 2.7 Gas generation and reprocessing 沼氣回收及再利用
□ 2.8 Plants 成套裝置
□ 2.8.1 Drinking water 飲用水
□ 2.8.2 Process water 工藝用水
□ 2.8.3 Rainwater utilization 雨水利用
□ 2.8.4 Waste water 廢水處理
□ 2.9 Heat recovery / energy production and saving
熱量回收、發電與節能
3. Water supply and sewerage systems
給水和排污系統
□ 3.1 Pipes and pipe fittings 管道及管道配件
□ 3.1.1 Pipes and pipe fittings made of concrete
混凝土管道及配件
□ 3.1.2 Pipes and pipe fittings made of cement
水泥管道及配件
□ 3.1.3 Pipes and pipe fittings made of cast iron
鑄鐵管道及配件
□ 3.1.4 Pipes and pipe fittings made of plastics
塑料管道及配件
□ 3.1.5 Pipes and pipe fittings made of steel
鋼管道及配件
□ 3.1.6 Pipes and pipe fittings made of stainless steel
不銹鋼管道及配件
□ 3.1.7 Pipes and pipe fittings made of stoneware
陶管道及配件
□ 3.1.8 Other pipes and pipe fittings 其他管道及配件
□ 3.1.9 Pipes with linings 襯砌管道
□ 3.1.10 Pressure pipes 壓力管道
□ 3.1.11 Pipe bushings 管套
□ 3.1.12 Pipeline accessories 管道配件
□ 3.1.13 Leak detection and monitoring 泄漏檢測和監測
□ 3.1.14 Detection technology (pipes, cable)
探測技術（管道、纜線）
□ 3.2 Shafts and special structures 豎井及特殊結構
□ 3.3 Outlets 排水口
□ 3.4 Fittings 配件
□ 3.5 Seals 密封裝置
□ 3.6 Corrosion protection 防腐蝕裝置
□ 3.7 Construction and maintenance 建造與維護
□ 3.7.1 Open cut construction 露天建設
□ 3.7.2 Trenchless technology 非開挖技術
□ 3.7.3 Cleaning 清潔
□ 3.7.4 Inspection 檢測
□ 3.7.5 Rehabilitation 修復
□ 3.8 Precipitation water 雨水收集
□ 3.9 Drinking water tanks - construction and rehabilitation
飲用水槽-建造與修復
4. Mechanical engineering and plant engineering in water
management 水資源管理中的機械工程和設備工程
□ 4.1 Pumps and lifting systems 泵和提升系統
□ 4.2 Process measuring and control technology
過程測量和控制技術
□ 4.3 Mechanical installations and control technology
機械裝置和控制技術
□ 4.4 Electronic installations 電氣裝置
□ 4.5 Transmission engineering 傳輸工程
□ 4.6 Other installations and accessories
其他裝置和配件
5. Refuse management and recycling
垃圾管理及回收
□ 5.1 Refuse collection and transport 垃圾收集與運輸
□ 5.2 Vehicles and superstructures 運輸車及其車廂結構
□ 5.3 Refuse treatment and recycling 垃圾處理與回收
□ 5.3.1 Screening 篩選
□ 5.3.2 Sorting plants 分選裝置
□ 5.3.3 Comminution machines 破碎機
□ 5.3.4 Mixers 攪拌機
□ 5.3.5 Driers 干燥機
□ 5.3.6 Presses 壓實機
□ 5.3.7 Hopper, conveyor and metering equipment
料斗、輸送機與計量設備
□ 5.4 Biological treatment and composting
生物處理和堆肥
□ 5.5 Landfills 垃圾填埋場
□ 5.6 Plants and equipment for the recycling, conditioning
and utilization of secondary raw materials
再生原材料回收利用與狀態調節設備
□ 5.7 Transmission engineering, fluid technology and power
generation units
傳輸工程、液體技術、發電裝置
□ 5.8 Accessories and wear parts 配件和磨損部件
□ 5.9 General purpose equipment, devices and accessories
通用設備、裝置和配件
□ 5.10 Accident prevention and safety
勞動安全防護
6. Generating energy from secondary raw and waste materials
再生原材料與廢棄物的能源利用
□ 6.1 Biogas plants 沼氣裝置
□ 6.2 Thermal treatment 熱處理工藝
□ 6.3 Utilization of landfill gas 填埋氣體的利用
□ 6.4 Substrate processing, transport and feed systems
基質加工、運輸和供給系統
□ 6.5 Gas transport and treatment 氣體運輸和處理
□ 6.6 Gas utilization 氣體利用
□ 6.7 Treatment of fermentation waste materials
發酵廢物的處理
□ 6.8 Biomass logistics 生物質物流
7. Street cleaning, maintenance and winter road services
道路清潔與冬季路面養護
□ 7.1 Street cleaning and maintenance services
道路清潔與養護服務
□ 7.2 Winter road services
冬季路面養護服務
8. Management of hazardous substances
有害物質管理
□ 8.1 Remediation of soil and groundwater
土壤和地下水的修復
□ 8.2 Remediation of pollutants in buildings / building demolition
建筑物和拆除建筑物里的廢棄物的修復
□ 8.3 Accident prevention and safety 事故預防和安全
□ 8.4 Analysis and laboratory techniques / services
分析和實驗室技術/服務
9. Flue-gas scrubbing and air extraction, air-pollution control
煙氣凈化、通風和大氣污染治理
□ 9.1 Separation of fluids and solid matter
燃料和固體物質的分離
□ 9.2 Separation of harmful gases 有害氣體的分離
□ 9.3 Flue-gas cleaning 廢氣清潔
□ 9.4 Biological exhaust gas purification 生物排氣凈化
□ 9.5 Other equipment and accessories 其他設備和配件
□ 9.6 Chemical processes 化工處理
□ 9.7 Condensation processes 冷凝工藝
□ 9.8 Catalytic processes 催化劑工藝
□ 9.9 Thermal processes 熱處理
□ 9.10 Odour treatment 除臭技術
□ 9.11 Analysis and measuring technology 分析測量技術
10. Water and recycling services
水務及資源循環利用服務
□ 10.1 Water-supply and sewage-disposal services
供水和污水處理服務
□ 10.2 Waste recycling and disposal services
廢棄物回收和處置服務
□ 10.3 Suppliers of secondary raw materials
再生原料供應商
□ 10.4 Users of secondary raw materials
再生原料用戶
□ 10.5 Consulting and engineering services
咨詢與工程服務
□ 10.6 Consulting for management and organization
管理與組織咨詢
□ 10.7 Information technology 信息技術
□ 10.8 Financing 融資
11. Analysis and laboratory techniques for water and recycling
水務及資源循環利用實驗室分析技術
□ 11.1 Analysis and laboratory techniques – Water
水務--分析和實驗室技術
□ 11.2 Analysis and laboratory techniques – Recycling
資源循環利用—分析和實驗室技術
12. Associations, education, research and technology transfer
協會、教育、科研與技術轉讓
□ 12.1 Vocational training and further training
職業培訓與繼續教育
□ 12.2 Universities 高校
□ 12.3 Research institutes 研究機構
□ 12.4 Trade associations and institutions 行業協會與機構
□ 12.5 Specialty publishers 專業出版商
13. Sustainability in road construction and maintenance
道路建設與維護的可持續性
□ 13.1 Demolition processes 拆遷過程
□ 13.2 Pre-sorting 預分類
□ 13.3 Process chain crushing 過程鏈破碎
□ 13.4 Conditioning 調溫調濕
□ 13.5 Utilization 利用
□ 13.6 Processes of Installation 安裝過程
□ 13.7 Materials for road construction and maintenance
道路建設與維護用料
□ 13.8 Digitalization 數字化
□ 13.9 Research and technology transfer 研究和技術轉讓
□ 13.10 Road construction services 道路建設服務
